Extracting Popcorn Ceiling is a fascinating job. It not only includes removing the old ceiling, but also involves rewiring the house so that a brand-new ceiling can be set up. But prior to you go ahead with the job, you need to do the appropriate research study about the whole process so that you understand what to anticipate. And in case you are not knowledgeable about the removal of the popcorn ceiling, here is a step by step guide that will help you.
When removing popcorn ceiling, ensure that you wear protective gloves and shatterproof glass, as they will protect you from any danger of injury when working. After selecting the favored removal contractor, pay a visit to his workplace and make certain that whatever is ready for the project. In addition to the devices, you will need to lease or buy a saw, screwdriver, hammer and other tools. Also, bring any heavy products with you to ensure that they too are safe throughout the extraction.
There are two common approaches of extracting popcorn ceilings. The very first one is to utilize drywall glue or tape to slow to the ceiling. The benefit of this method is that it requires little effort; nevertheless, the problem with it is that it may not completely extract the popcorn. Furthermore, the drywall glue or tape is a bit untidy, which may make the entire job difficult.
The 2nd suggested way for removing popcorn ceiling is by utilizing drilling devices or heavy duty industrial trucks with cranes to extract them. In order to effectively extract it, make certain that you remove all the lighting fixtures and other heavy components present on the ceiling. Moreover, remove all the tiles and lighting fixtures present in the space. Remove any type of decors to make it simpler to access the screws or the jambs that can be extracted.
Scrapers are utilized for raveling the texture or coating on the walls and ceiling. It is best to utilize an old toothbrush or cotton swab as it enables scraping without damaging your floorings or furnishings. Keep in mind that if there is any texture on the wall, ensure to smooth it out utilizing scraper. Nevertheless, if you are planning to scrape without damaging your surface areas, you can utilize the same things for the purpose. Just damp the object, spread it on the wall and permit it to sink into the wall or flooring.
Use the fiber brush and scrape along the surface of the product. Make certain you use safety gloves when using the asbestos scraper to prevent getting exposed to the substance. If the substance is exposed, it might cause some health problems like shortness of breath, coughing, swelling of the lung tissue and other related illnesses. When you have scraped enough, you must now be able to see the popcorn. Now that the popcorn is extracted, you can proceed to the painting job.
Prior to applying the paint, you require to take off all designs on the ceilings. It is better to remove them prior to using the paint because you will not need to sand them later on. The next action is to apply a thin coat of paint on the ceiling utilizing the supplied brush. This will cover the popcorn texture left on the ceilings.
For the third and last action, place the textured ceiling panels on top of the old one and let it dry for a few hours. You can then go back to the lights and change the lights. Prior to installing the light fixtures on the ceilings, make sure that the panels are set up appropriately so that there is a brand-new layer of texture applied which the new layer matches the texture of the ceiling completely.
Popcorn Ceiling Removal Austin
2882 Barton Skyway #239 A
Austin, TX 78746